![]() If the pairing mode is released before finishing the process, repeat from step. ![]() However, when pairing information is not stored in the speaker, such as at the factory settings, the pairing mode is not released. The pairing mode of the speaker is released after about 5 minutes and the (BLUETOOTH) indicator flashes slowly. To connect the speaker with another BLUETOOTH device, do either of the following: The speaker is already connected with one of the BLUETOOTH devices. For details, refer to the operating instructions supplied with your BLUETOOTH device. ĭepending on the BLUETOOTH device, the speaker may be reconnected with the device right after it is turned on. To reconnect the speaker with one of the BLUETOOTH devices that have been paired with the speaker before, proceed to step. To pair the speaker with a second or subsequent BLUETOOTH device (when the speaker has pairing information of other BLUETOOTH devices), proceed to step. The speaker is searching for BLUETOOTH connections. When the speaker of your computer is set to on:Īfter you pair the speaker with a BLUETOOTH device for the first time since purchase or initialize the speaker (the speaker has no pairing information), the speaker automatically enters pairing mode when it is turned on. If the speaker of your computer is set to (mute), sound does not output on the BLUETOOTH speaker. If you do not know how to turn on the BLUETOOTH adaptor or whether your computer has the built-in BLUETOOTH adaptor, refer to the operating instructions of your computer. Turn down the volume of the computer and speaker to avoid any sudden loud sound output from the speaker.ĭepending on your computer, turn on the built-in BLUETOOTH adaptor. Prepare the operating instructions supplied with the computer for reference. Or charge the rechargeable built-in battery sufficiently. Place your computer within 1 m (3.2 ft) of the speaker.Ĭonnect the speaker to an AC outlet with the AC adaptor (supplied). Supported operation systemsĬonfirm that the BLUETOOTH wireless technology is installed in your computer. Perform the same procedures to pair to other devices. It is necessary to pair a device with the speaker to be able to make a BLUETOOTH connection for the first time. ![]() Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly. ![]()
0 Comments
Leave a Reply. |